Known quantity – RADWAG PS 510.R2.CT Carat Balance User Manual
Page 96
- 96 -
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <COUNTING PIECES> the following options are available,
which a user can assign to each of the F buttons:
NONE
– no function assigned to the button
ENTER SAMPLE
– function initiates the option of entering the reference
mass of a single piece
DETERMINE SAMPLE
– function initiates the option of automatic
determination of the mass of a single piece from a number of samples of
known quantity
SELECT PRODUCT
– function initiates the option of selecting a product
from product database
LOG IN
– function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE
– function initiates the option of inserting packaging mass
SELECT TARE
– function initiates the option of selecting packaging
mass from product database
PRINT HEADER
– function initiates the print-out of a designed header
PRINT FOOTER
– function initiates the print-out of a designed footer
VARIABLE 1
– function initiates the selection and editing of variable 1
VARIABLE 2
– function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.
18.2.2. Setting the reference mass by determining from the sample of known
quantity
While determining the mass of a single piece the function ACAI (Automatic
Accuracy Correction) is in use.
Means of operation of ACAI function:
-
Number of pieces ( on adding) on balance’s weighing pan has to be
greater than has been previously