Rana Systems Elite Series User Manual
Page 125
ELITE SERIES USER MANUAL CP/M ENHANCEMENTS
Insert that second blank diskette which was
mentioned earlier, then type:
<RETURN>
FORMAT will respond with:
Formatting...
The drive will chatter and spin for almost a
minute, (or two if formatting an Elite Two or
Three diskette), then the screen will display:
FORMAT Complete
Format disk in which drive?
To end the FORMAT utility, press:
<RETURN>
without specifying any drive information. Once
again FORMAT will remember that you had to re-
move the enhanced CP/M master diskette in order
to insert the blank diskette to be formatted, so
it will say:
Insert CP/M System disk in drive A:
Press RETURN
Remove the just formatted diskette and reinsert
the enhanced CP/M master diskette. Then press:
<RETURN>
CP/M will eventually respond with “A>”.
P a g e 4 — 5 8