Rana Systems Elite Series - Manual (Page 48)

ELITE SERIES USER MANUAL DOS ENHANCEMENTS
Type:
<RETURN>
and FORMAT will read in the DOS image from that
diskette.
After the image is in memory, FORMAT will ask:
SLOT NUMBER (1-7)? 6
FORMAT is asking for the slot number of the
drive to be used for formatting. Just like
PROFILE, FORMAT has “pre—loaded” the message
with the default response. Since the default is
correct, type:
<RETURN>
And FORMAT will ask:
DRIVE NUMBER (1-4)? 2
This time FORMAT got the wrong default. FORMAT
assumes that it was run from a drive containing
a system diskette, so it must be the “other”
drive which you wish to use for formatting.
Since you will want to use the first drive
(one), type (without <RETURN>):
1
Page 3 — 2 3