Rana Systems Elite Series User Manual
Page 32
ELITE SERIES USER MANUAL
DOS ENHANCEMENTS
any other diskettes from any other drives. With
the new diskette in the system drive, type:
INIT HELLO<RETURN>
and DOS will INITialize the diskette. The drive
will rattle and spin for less than a minute, and
then the BASIC prompt should reappear. The last
thing INIT did was save a copy of whatever
program was in memory during the INIT out onto
the diskette. You should get rid of this pro-
gram by typing:
DELETE HELLO<RETURN>
If you are using an Elite Three as your system
drive, you will need to repeat this process on a
second diskette. Insert another one of your
four new diskettes into the system drive and
type (Elite Three only):
INIT HELW<RETURN>
After you get back the BASIC prompt, type (Elite
Three only):
DELETE HELLO<RETURN>
Once the BASIC prompt is redisplayed, remove the
new diskette from the drive and reinsert the DOS
diskette. Type (all drive types):
BRUN MASTER CREATE<RETURN>
Page 3-7