Rana Systems Elite Series - Manual (Page 47)

ELITE SERIES USER MANUAL DOS ENHANCEMENTS
The reason why this newly configured DOS prob-
ably won’t boot correctly is because you’ve told
the DOS image on the diskette that your system
drive is some special type of drive (assuming
you’re not using a Disk II). But the diskette
upon which this DOS is written is not formatted
for use by the special drive operating at its
full capacity. The next step is to create a
diskette which is correctly formatted.
Remove configured master and insert the En-
hancer diskette. Type:
BRUN FORMAT<RETURN>
FORMAT will respond with:
FORMAT
RANA SYSTEMS’ 16-SECTOR DOS 3.3
5-INCH DISKETTE INITIALIZING UTILITY.
COPYRIGHT (C) (P) 1982 RANA SYSTEMS
FORMATTER VERSION 2.1
INSERT AN ENHANCED DOS 3.3 SYSTEM
MASTER DISKETTE INTO SLOT #6, DRIVE # 1.
PRESS <RETURN> WHEN READY TO READ DOS
IMAGE INTO MEMORY. PRESS <ESC> TO
TERMINATE THIS UTILITY.
Remove the Enhancer diskette and insert config—
tired master.
Page 3—22