Rana Systems Elite Series User Manual
Page 214
ELITE SERIES USER MANUAL
ENHANCED DOS UTIL.
Elite Three is used in the copy process when not
performing a straight Elite Three to Elite Three
copy.
It is possible to use the Elite Three as the
source drive for all types of diskette copies.
This goes right along with the standard Elite
Three usage rule that it can read any of the
lesser storage capacity diskettes.
When the Elite Three is used as the destination
drive, a very special point needs to be remem-
bered. The resultant destination (duplicate)
diskette will not be compatible with its as-
sociated drive type, unless the diskette and
drive type is Elite Three. Once again, this
comes from the fact that the Elite Three is not
write compatible with non-Elite Three drives.
This is not to say that the Elite Three can’t be
used as the destination drive in a non-Elite
Three copy. This simply means that the
resultant diskette will only be readable by an
Elite Three drive.
After all the source drive and diskette
questions have been answered, CLONE will move on
to the destination (duplicate) drive and
diskette information:
DESTINATION:
SLOT NUMBER (1-7)? <ds>
<ds> is the default answer you will BE
specifying if you just press <RETURN>. If <ds>
is not the slot number you want for the
P a g e 9 - 1 7