Rana Systems Elite Series User Manual
Page 224
ELITE SERIES USER MANUAL
ENHANCED DOS UTIL.
immediately after the first five characters as
follows:
S = Slow (Disk II standard)
M = Medium (Elite One standard)
F = Fast (Elite Two and Three standard)
This displayed table shows how each drive
position which is possible on the Apple II is
currently defined. Including drive positions
for which there are no controllers or drives at
the present time.
Following the table, PROFILE will display a menu
of choices:
ENTER SELECTION (0-3)
1)LOAD NEW DOS IMAGE FROM DISK
2)CHANGE CURRENT DOS IMAGE SETTING
3)SAVE CURRENT DOS IMAGE 2V DISK
0)TERMINATE PROFILE
You can choose an item by pressing its menu
number without pressing <RETURN>.
The first item allows you to read into memory a
different copy of DOS to b~ altered. (Note:
reading a DOS copy into memory does not mean
replacing the currently operating DOS copy.)
The second item allows you to make changes to
the copy of DOS you already have in memory. The
third item allows you to save the DOS copy you
have in memory (changes and all) back out to a
diskette. And the last item gets you out of
PROFILE back to BASIC.
P a g e 9 - 2 7