Rana Systems Elite Series - Manual (Page 131)

ELITE SERIES USER MANUAL CP/M ENHANCEMENTS
Since COPY knows nothing of this little diskette
change that occurred, it will respond with:
Insert SOURCE disk into drive A:
Insert TARGET disk into drive B:
Press RETURN to begin
With SGLDRIVE running, this message is basically
redundant, so just press:
<RETURN>
SGLDRIVE will then request:
Mount A:, Press <ESC>
Change the diskette in the drive back to the
enhanced CP/M master and press:
SGLDRIVE will then allow COPY to proceed with
reading the CP/M system off of the enhanced CP/M
master diskette. When COPY changes to trying to
write the enhanced CP/M to the higher capacity
diskette, SGLDRIVE will request:
Mount B:, Press <ESC>
Insert the higher capacity diskette into the
drive and press:
P a g e 4 - 6 4