Rana Systems Elite Series User Manual
Page 129
ELITE SERIES USER MANUAL
CP/M ENHANCEMENTS
and of course, if you’re an Elite Three user,
type:
D:3<RETURN>
PROFILE will then go through all the same steps
it did when you redefined drive B:, except this
time it will apply to drive D:. Once you get
back to the asterisk (“*”) prompt, type (without
<RETURN>):
<CTRL-C>
to get out of PROFILE. CP/M will respond with
“A>”.
Unlike Apple DOS’s “INIT” command, CP/M’s FORMAT
does not place a copy of the operating system
(in this case, CP/M) onto the newly formatted
diskette. This task is left up to the COPY
utility, which will place a copy of CP/M onto an
existing diskette without altering any other
information on the diskette. Since that is what
you will want to do now, type:
COPY<RETURN>
to get the new COPY utility running.
P a g e 4 - 6 2