Rana Systems Elite Series User Manual
Page 137
ELITE SERIES USER MANUAL
CP/M ENHANCEMENTS
Since the diskette is already inserted, press:
<ESC>
and PROFILE will continue by writing out the new
configuration.
When its finished, it will return to the aster-
isk (“*”) prompt.
To get out of PROFILE, insert the enhanced CP/M
master into the drive and type:
<CTRL—C>
SGLDRIVE will catch the change in drives and do
its little:
Mount A:, Press <ESC>
The enhanced CP/M master is already inserted, so
just type:
<ESC>
CP/M will then respond with its “MA>” prompt. To
complete your higher capacity system diskette,
you’ll need to copy the CP/M distribution files
(from Microsoft and Rana) onto the higher capa-
city diskette from the enhanced CP/M master. You
should read ahead at this point (if you’re not
already doing so) up to the point where PIP
finishes what it is about to do. This next step
is a little involved (but not complicated), so
you’ll want to know what’s coming up.
P a g e 4 — 7 0