Rana Systems Elite Series User Manual
Page 73
ELITE SERIES USER MANUAL
CP/M ENHANCEMENTS
The length of these instructions is due to the
fact that this will be your initial creation of
an enhanced CP/M. Once this initial diskette is
created, life becomes alot easier. Even though
the instructions are lengthy, they are not ter-
ribly complex to follow.
If you intend to make use of either an Elite Two
or Three drive as your system drive (A:), it may
be necessary to temporarily configure your sys-
tem in a different configuration than what will
be your final configuration. A temporary prob-
lem arises if you do not have a second Elite Two
or Three to match the one you will be using as
drive A:. This is because you do not, as of
yet, have a copy of CP/M which can deal with
various combinations of drives. Since these
multi-drive enhancement instructions only rely
on you having two drives, you will only need to
rearrange your A: and B: drives. Regardless of
the type of drive you will be using as A: in
your final configuration, you should temporarily
reconfigure your system according to the follow-
ing table:
Page 4-6