Rana Systems Elite Series User Manual
Page 134
ELITE SERIES USER MANUAL
CP/M ENHANCEMENTS
What you’ve told PROFILE so far is that you are
interested in updating the CP/M system in drive
B: “B:=”) (with the help of SGLDRIVE), and the
change you wish to make is to drive A: (“A:).
However, you’ve yet to specify the change to be
made. Remember that drive type number you used
back in FORMAT and PROFILE? It’s time to type
that again.
Example: If your drive is an Elite Two (in which
case phoney drive B: would be defined as an
Elite Two right now), you would want to type:
B:=A:2
If your drive is an Elite One, type:
B:=A:1
and last, but certainly not least (by about
500,000 bytes of storage), an Elite Three would
be:
B:=A:3
Once you’ve entered the drive type number,
press:
<RETURN>
and PROFILE will respond with (again):
Insert a system disk in B:
<RETURN> to continue/retry;
<ESC> or <CTRL-C> to abort.
P a g e 4 — 6 7