Rana Systems Elite Series - Manual (Page 42)

ELITE SERIES USER MANUAL DOS ENHANCEMENTS
The last letter is the speed at which the drive
is seeking from track to track:
S = Slow (Disk if standard)
M = Medium (Elite One standard)
F = Fast (Elite Two and Three standard)
Below the table, the following menu will be
displayed:
ENTER SELECTION (0-3) :
1) LOAD NEW DOS IMAGE FROM DISK
2) CHANGE CURRENT DOS IMAGE SETTING
3) SAVE CURRENT DOS IMAGE TO DISK
0) TERMINATE PROFILE
For now, you’ll just need to change the setting
for drive one off of slot six (your system
drive), so type (without <RETURN>):
2
in order to change a setting. PROFILE will then
ask:
ENTER SLOT NUMBER (1-7)
so type (without <RETURN>):
6
and PROFILE will respond with:
ENTER DRIVE NUMBER (1-4)
Page 3—17