Rana Systems Elite Series User Manual
Page 217
ELITE SERIES USER MANUAL ENHANCED DOS UTIL.
diskette data into a structure which is
compatible with the Elite Three, hut which will
not have the full storage capacity of the Elite
Three. Then FIDR can be used to copy the
individual files from the restructured diskette
onto a full capacity Elite Three diskette.
Back to CLONE itself. Once the destination
drive and diskette questions have been answered,
CLONE will say:
PLEASE INSERT BOTH DISKETTES AND
PRESS <RETURN>
if you specified different source and dest-
ination drives, or:
PLEASE INSERT THE SOURCE DISKETTE
AND PRESS <RETURN> TO CONTINUE.
if you specified the same drive for both source
and destination.
This is your indication that CLONE is ready to
being the copying process. You should insert
either just the source diskette (single drive
copy) or both diskettes (two drive copy), and
then press <RETURN> to being the copy process.
If you specified that only the DOS is to be
copied, then CLONE will give you a reminder to:
INSERT AN ENHANCED DOS 3.3 SYSTEM
MASTER DISKETTE INTO SLOT #<s>, DRIVE #<d>.
PRESS <RETURN> WHEN READY TO READ DOS
IMAGE INTO MEMORY. PRESS <ESC> TO
P a g e 9 - 2 0