Barco CLM R10+ - Manual (Page 101)

9. Image menu
Image 9-105
Image 9-106
Image 9-107
Image 9-108 Image 9-109
9.7 Save custom settings
What is done?
The current custom settings can be saved to the internal backup device in the same way as it would be done when the projector
was switched to standby.
How to save
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Save custom settings and press ENTER.
The custom settings are written to the internal backup device. A message menu “Save data ...” is displayed during the save
operation. (image 9-110)
Image 9-110
R59770021 CLM R10+ 11/10/2010 97