2 orientation, Orientation, Alignment menu – Barco CLM R10+ User Manual
Page 122
12. Alignment menu
Level 1
Level 2
Level 3
Full screen green
Full screen red
Full screen white
Hatch
Outline
Purity
ScenergiX
Color space
Projector
EBU
SMPTE
Custom
White peaking
ScenergiX
Status
White level
Bottom
Black level
Show pattern
Reset
12.2 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
•
front/table
•
front/ceiling
•
rear/table
•
rear/ceiling
Set up the correct orientation
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Orientation and press ENTER.
4. Use the ▲ or ▼ key to select the correct orientation and press ENTER. (image 12-1, image 12-2, image 12-3)
Image 12-1
Image 12-2
Image 12-3
118
R59770021 CLM R10+ 11/10/2010