Barco CLM R10+ - Manual (Page 151)

13. Projector control
Image 13-45
13.6.3 DMX monitor
What can be done?
If a DMX device is connected, the settings per channel can be displayed in an on screen menu.
How to start up the monitoring
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX monitor and press ENTER.
The DMX monitor window opens. Depending on the DMX mode, the Normal view or the Simple view of the DMX monitor window
opens. (image 13-46, image 13-47, image 13-48, image 13-49, image 13-50)
Image 13-46
Image 13-47
Image 13-48
Image 13-49
R59770021 CLM R10+ 11/10/2010 147