Ransburg DynaFlow User Manual - Manual (Page 43)

LN-9400-00.9
DynaFlow TM User Manual - Operation
39
Data Displays – At the top of the graphing screen
there may be as many as six white boxes with data
in them. The center two boxes indicate the time
of the start and stop cursors (start on top, stop
on the bottom). The other four boxes indicate the
value of the graphed variable at the point where
the cursors are currently positioned.
JOB TOTALS (F7)
Calendar date/time data is not available from the
Interface Module and must be supplied by the
Operator Interface or host computer.
Daily Total
(For each JOB per CHANNEL)
Records accumulated total of all material through
a CHANNEL since last reset. Any time period as-
sociated with this total is based on when it is reset.
For example, if it is reset after each rack or part,
at the end of a shift, end of the day, or end of day.
Yearly Total
(For each JOB per CHANNEL)
Records the accumulated total of all material
through a CHANNEL since last reset. Any time
period associated with this total is based on when
it is reset. For example, if it is reset at the end of
a shift, end of the day, or end of the year.
Calibration Total
(For each JOB per CHANNEL)
Records the accumulated total of all material
through a CHANNEL while in CALIBRATION
MODE of operation since last reset.
Grand Total
(For each JOB per CHANNEL)
Records the accumulated total of all material
through a CHANNEL, including while in CALI-
BRATION MODE of operation, since last reset.
Any time period associated with this total is based
on when it is reset. For example, if it is reset at the
end of a shift, end of the day, or end of the year.
Daily Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for all
JOBs through a CHANNEL since last reset. Any
time period associated with this total is based on
when it is reset. For example, if it is reset at the
end of a shift, end of the day, or end of the year.
Yearly Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for
all JOBs through a CHANNEL sincle last reset.
Any time perior associated with this total is based
on when it is reset. for example, if it is reset at the
end of a shift, end of the day, or end of the year.
Calibration Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material
for all JOBs through a CHANNEL while in CALI-
BRATION MODE of operation since last reset.
Grand Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for
all JOBs through a CHANNEL, including while
in CALIBRATION MODE of operation, since last
reset. Any time period associated with this total
is based on when it is reset. For example, if it is
reset at the end of a shift, end of the day, or end
of the year.
Clean Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for
all JOBs through a CHANNEL, while in CLEAN
MODE of operation, since last reset. Any time
period associated with this total is based on when
it is reset. For example, if it is reset at the end of
a shift, end of the day, or dend of the year.
CALIB PROC
CHANNEL #
CHANNEL to be calibrated (1-8). Each CHANNEL
must be calibrated separately.
Calibration Mode
Sets open-loop manual or closed-loop automatic
calibration mode.