Ransburg DynaFlow User Manual - Manual (Page 85)

LN-9400-00.9 81
DynaFlow TM User Manual - Maintenance
All data will be lost when
set to ON position.
Number Of Channel
Modules:
1
1 to 3
1 to 4
1 to 4
Position Description Comments
1
2
3-4
5-6
7-8
ON = NVRAM Erased & Reset
OFF = NVRAM Maintained
ON = Master Channel outputs Master
Chanel flow rate on secondary
analog output.
OFF = Master Channel outputs GUN flow
rate on secondary analog output.
RIO Baud rate position
3 4 Baud Rate
OFF OFF = 57.6 KB
OFF ON = 115.2 KB
ON OFF = 230.4 KB
ON ON = 230.4 KB
SIO Baud rate position
5 6 Baud Rate
OFF OFF = 19.2 KB
OFF ON = 4.8 KB
ON OFF = 9.6 KB
ON ON = 38.4 KB
RIO Rack Size position
7 8 Size
OFF OFF = 1/4 Rack
OFF ON = 1/2 Rack
ON OFF = 3/4 Rack
ON ON = Full Rack
Default Setting
OFF
OFF
OFF
OFF
OFF
INTERFACE MODULE DIP SW2 SETTINGS
* Inserting this jumper adds a 120 Ohm termination resistor across the RS-485 RX+ and
RX- lines.
** Inserting this jumper adds a 120 Ohm termination resistor across the Ransburg CAN Bus.