CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 153)

I /O Applications 2
[Video Lost Trigger I/O] Activates the specified output module if any camera loses its video signal.
[Momentary Mode] Pushbutton switches that are normally open and stay closed only as long as the
button is pressed. Momentary switches allow turn-on or turn-off from multiple locations. For example,
certain premises have a designated entry/exit door. When the staff enters the entry door, the system
starts monitoring. When the staff leaves from the exit door, the system stops monitoring.
[Maintained Mode] Push-on/push off button switches that stay open until thrown, and then stay closed
until thrown again. Maintained switches are convenient for only one switch location.
For example, in the business hour when the door is opened, the system stops monitoring; in the
non-business hour when the door is closed, the system starts monitoring.
Deactivating Alarm and Alert Settings
The option lets you instantly deactivate all the prior alarm and alert settings (Output, Wave Alarm, Send
Alerts), when an assigned input module is triggered. Open the I/O Application window (Figure 2-8), and
find the following section.
Figure 2-9
[Deactivate notification when selected pin is ON] When an assigned input module is activated, all
designated alarms and alerts will be disabled. Assign an installed input module and a pin number for
the application.
[Deactivate Notification]
„ Triggered by: Select an alert condition from the drop-down list for the application. For example, if
you choose Motion, all designated alarms and alerts upon motion detection will be deactivated
when an assigned input module is activated.
„ Deactivate Selected Notification: Select the alarms and alerts you want to be deactivated, such
as Output, Wave Alarm and/or Send Alert, when the assigned input module is activated.
139