CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 33)

Configuring Main System 1
Geo H264 and Geo H264 V2: Provides a much smaller compressed file size than any other
available codec yet without compromising the image quality. Compared to Geo H264, Geo
H264 V2 provides a smaller compressed file size, but has a lower frame rate and higher CPU
usage.
~ Right-Arrow button: Click to bring up the Day-Night Recording Mode setup dialog box
(Figure 1-14).
„ Apply Advanced Codec Setting: See Geo Mpeg4 (ASP) Advanced Settings later in this chapter.
The Advanced Codec Setup button also includes the functions of noise detection and
multithreading encoding. See Noise Detection to Reduce File Size and Multithreading Encoding
later in this chapter.
„ Invoke Alarm: Sends computer alarm (.wav sound file) on motion detection.
„ Invoke to Send Alerts: Sends an assigned alert (E-Mail/Hotline/SMS) when motion occurs. Use
the slider bar to specify the motion duration to invoke the alert. The choices include High (0.5
seconds), Normal (1 second), and Low (1.5 seconds). For example, suppose you choose High.
When motion remains for 0.5 seconds, the alert will be sent out.
~ Right-Arrow button: Click to set the delay time to activate assigned alerts.
„ Output Module: Triggers the specified output pin on motion detection. Use the drop-down list to
select an output pin to perform this function.
~ Right-Arrow button: Click to set the delay time to activate the assigned output module.
„ Register Motion Event: Records motion events to System Log.
Note: The delay time functions in Invoke to Send Alerts and Output Module allow you time to
deactivate prior alert and output settings. To deactivate these settings, you may stop monitoring or
enable the assigned input module set at “Deactivate notification when selected pin ON" in Figure
2-9, in Chapter 2.
[Video Resolution] Allows you to adjust video characteristics such as brightness, contrast, saturation,
and hue.
19