CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 67)

Configuring Main System 1
Mode: This column shows the following messages:
„ Local: Appears if a user logs in or logs out the Main System.
„ WebCam (Mpeg4): Appears if a remote client logs in or logs out the WebCam server.
„ TCP: Appears if a user logs in or logs out the TCP Server.
„ Modem: Appears if a user logs in or logs out the Modem Server.
„ Multicast: Appears if a user logs in or logs out the Multicast Server.
„ Remote DVR: Appears if a Control Center operator logs in or logs out via the Remote DVR
service.
„ Remote Matrix: Appears if a Control Center operator remotely logs in or logs out via the
Matrix View service.
„ Remote Desktop: Appears if a Control Center operator logs in or logs out via the Remote
Desktop service.
Note: This column shows the IP address of the client server.
[Counter] This function shows the information and result of GV-System’s counter function.
Figure 1-46
ID: This column shows the event ID number
Start Time: This column shows the time when GV-System’s counter function is activated.
End Time: This column shows the time when GV-System’s counter function is terminated.
Device: This column shows the camera that performs counter function.
In: This column shows the “In” result of GV-System’s counter function.
Out: This column shows the “Out” result of GV-System’s counter function.
[POS] This function shows the POS event information. Double-clicking on the log list will allow you to
view related video in ViewLog or Quick Search (depending on the video player you selected in the
Activate System Log dialog box. See Figure1-26).
53