CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 39)

Configuring Main System 1
Selecting Screen Layout
This feature gives you the option of screen layout for the 8, 12 and 16 screen divisions.
1. Click the Configure button (No.14, Figure 1-2), point to General Setting, and then select System
Configure. The System Configure window appears.
2. In the Startup section, click the Arrow button next to the Panel Resolution item to call up the
following window. The left mode is the default layout; the right is the enhanced layout.
Figure 1-21
3. For the enhanced layout, click the Activate Quad Enhanced option, and click OK.
4. Restart the GV-System to apply it.
Note:
z When the enhanced screen layout is applied, the camera 1 view will show on the central screen;
when the popup feature is enabled, the pop-up view will show on the central; when the camera
scan feature is enabled, the scanned view will show on the central.
z If you are using the DSP card, GV-System won’t support the enhanced screen layout.
25