CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 261)

Viewing Live Video Using WebCam 6
[RPB]
Figure 6-4 Server Setup- RPB
This feature is used to prevent overloading on slower networks.
„ Max. Channel(s): Specify the number of channels allowed to download to a client PC.
„ Bandwidth Control: Enable and specify the rate of data to be transferred over network. The
option effectively controls the bandwidth being used by the WebCam server.
[Audio]
Connecting Audio Devices
Via WebCam, you can access live audio at a remote site and talk to the server site. This feature is
useful when the remote site requires speaking to the personnel at the server site in case of emergency.
Before using this feature, make sure all the necessary hardware are in place:
1. If you purchase a BNC connector GV-System, connect the audio extend card to the system (see
Installation Guide). If you purchase a D-type connector GV-System, audio extension cable lines
should come available with the D-Type extension cables. For GV-1000, the audio card must be
purchased separately.
2. Make sure your sound card is already inside the computer. Connect a multimedia speaker to the
audio output of your computer’s sound card.
3. Connect a desktop microphone to the input of the audio extension card (or cable line).
247