CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 94)

80
Object Zooming
If only one PTZ camera is available, without the stationary camera, you can simply apply it for the
object zooming function. The feature allows you to configure up to 4 critical views for instant
monitoring and zooming.
PTZ Setup
Before configuring the Object Tracking function, first configure the PTZ device. Refer to the PTZ Setup
of Object Tracking.
Object Zooming Setup
After the above PTZ setup, go back to the menu bar.
1. Click the Configure button (No. 14, Figure 1-2), point to Video Analysis, select Object Tracking
Application, and select Object Tracking Setup to display the Object Tracking Config window.
Then click the Zoom in Object tab in the upper part to display the following window.
Note: No images will show in the right screen until you complete the settings below.
Figure 1-77