CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 200)

186
Privacy Mask Settings
In case you forget to set the Privacy Mask at the Main System or need to add more Privacy Masks
onto the video for special requirements, you can do that in ViewLog.
1. In the Export with New Privacy Mask Region(s) section (Figure 4-8), select Un-recoverable
and/or Recoverable.
„ Un-recoverable: The block-out area(s) in the recorded clips cannot be retrieved.
„ Recoverable: The block-out area(s) is retrievable with password protection.
2. Drag the area(s) where you want to block out on the image. You will be prompted to click Add to
save the setting.
Using a valid ID and Password, you can retrieve the recoverable block-out area(s) in the exported file.
For details on the Privacy Mask, see Privacy Mask Protection in Chapter 1.
AVI File Settings
To configure the format of exported video, follow these steps:
1. Click the Setting tab on the Save AVI File window. This window appears.
Note that when you save the AVI file in single view mode, the window looks slightly different.
Figure 4-9