CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 42)

28
Setting Up Auto Reboot
The Auto Reboot feature restarts your Windows at a scheduled time. Click the Configure button
(No.14, Figure 1-2), point to General Setting, and then select Auto Reboot Setup from the menu to
bring up this dialog box.
Figure 1-25
[Auto Reboot System]
Enables the setup for reboot time. Specify how often (from 1 to 14 days) at the Day Interval selection
field, and when the Windows should reboot at the Reboot Time.
„ Restore Last Status: The system will resume the last operation after rebooting, e.g. camera
recording.
„ Apply Startup Settings: The system will apply your Startup settings in the System Configure
window after rebooting.
[Delay for Cancel Reboot] When the item is checked, a warning message will appear and count
down your specified time before the reboot schedule begins. Clicking the Cancel button on the prompt
will cancel the rebooting.
[WatchDog Reset if Reboot System Suspend and Fail]
Prior to Reboot Time, if GV-System finds any abnormal Windows operation that may hinder the Auto
Reboot, GV-System will instruct a hardware reboot of Windows. The feature is available only in
GV-600, GV-650, GV-800, GV-1120, GV-1240, GV-1480, GV-2004 and GV-2008.
Note: GV-System must already be added to Windows Startup menu; only so will the Windows
automatically restart GV-System after a reboot. Also, make sure you’ve correctly connected a GV
video capture card to your motherboard for the hardware watchdog feature.