CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 41)

Configuring Main System 1
Camera / Audio Install
Click the Configure button (No.14, Figure 1-2), point to General Setting, and select Camera / Audio
Install to bring up the following dialog box:
Figure 1-24
[Camera] Click the Activate button and specify the cameras to be viewed by default. Clearing the
selection of Cameras from viewing does not affect the cameras being recording.
[Startup] Configure the startup camera screens and screen divisions.
„ Default Screen Division: To select the desired screen divisions at startup, check the option and
click the right arrow button.
„ Limit Port: To restrict camera screens at startup, check the option and select desired port
numbers. This function will take effect at next system startup.
[Wave-in Device] Adjust audio devices to record and listen to live sound.
„ Audio: Choose to set up an audio channel from the drop-down list.
„ Monitor Sensitivity: Adjusts sensitivity of the audio that will be detected. The higher the value,
the more sensitive it is to the surrounding sound.
„ Gain Control: Increases or decreases the gain of the microphone.
„ Wave Out: Select to listen to live audio at the server PC.
„ Rec Audio: Enable to activate the audio recording function.
27