CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 71)

Configuring Main System 1
Special Days Schedule
1. Click the Special Day Schedule tab.
2. All settings are the same as those in Video Schedule, except the following section. Use the
drop-down list and select a date from the pop-up calendar. Click Apply to add the date to the
schedule.
Figure 1-49
I/O Schedule
Set up a schedule to activate the monitoring of I/O devices automatically. All settings are the same as
those in Video Schedule, except the following section. After setting up scheduled time and dates,
select the I/O Monitor option to activate the schedule.
Figure 1-50
Center V2 Schedule
Set up a schedule to connect to Center V2 services automatically. All settings are the same as those in
Video Schedule, except the following section. After setting up scheduled time and dates, select the
Center V2 option to activate the schedule. For details on Center V2, see Chapter 1 in GV-CMS Series
User’s Manual.
Figure 1-51
Note: If you select the Center V2 check box without setting up the Center V2 schedule and later
enable the Center V2 server, the connection to Center V2 will be stopped automatically after 15
minutes. For this problem, please complete the setup of Center V2 schedule or clear the Center V2
check box.
57