CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 375)

Useful Utilities
10
If the connection is established, the Network Server, Show Video Status, and Test Video buttons will
be available. You can now use them to set up TwinDVR for:
•
Testing Video Stream
•
Starting WebCam Server at TwinDVR
•
Setting Multiple TwinDVRs in TCP/IP Mode
•
Setting Multiple TwinDVRs in Multicast Mode
Testing Video Stream
This function allows you to test the video transmission between TwinServer and TwinDVR. Click the
Show Video Status button to display 16 monitoring windows beneath the TwinDVR dialog box. Click
the Test Video button and video streams from the connected TwinServer will be streamed to the
monitoring windows for 10 seconds. You may click the Hide Video Status button to close the
monitoring windows.
Figure 10-9 Testing Video Stream
361