CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 27)

Configuring Main System 1
[Caption] Enters heading to have it displayed on the upper left-hand corner of the camera screen. You
may choose No for no heading; ID to show only camera ID; ID+Name to show both camera ID +
Name.
[Send Alerts Approach] Click the arrow button to choose whether to be notified by E-mail, telephone
or SMS when alert conditions occur under the surveillance area.
For the telephone setup, see Configuring Hotline/Network Notification later in this chapter.
For the E-mail setup, see Sending Alerts thru E-Mail Accounts later in this chapter.
For the SMS setup, see Short Message Service in Chapter 9.
[Exit Option] Check the box to enable the feature. Press the blue Arrow button to switch between
Auto Shutdown Windows and Auto Restart Windows. Auto Shutdown Windows closes Windows
OS after exiting GV-System. Auto Restart Windows restarts Windows OS after exiting GV-System.
[PTZ Control] Adds PTZ cameras to the system. See operation details in PTZ Control Panel later in
this chapter.
[Monitor Option]
„ Start Delay: Starts monitoring after x second(s) when the system is activated.
„ Post-Rec Motion: Keeps on recording for a set period of time (1-10 seconds) after motion stops.
„ Pre-Rec Motion: Records video for a set period of time before motion starts. This feature allows
you to choose RAM or HDD as a pre-recording buffer. The difference between the two is that RAM
can save smaller pre-record from 1 second to 1.5 minutes, while the hard disk can save larger one
from 1 minute to 45 minutes.
13