Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 25)

Installing the Adapter 2-7
1. Install the drive cover. The status indicators can be viewed on the
front of the drive after power has been applied.
2. Apply power to the PowerFlex drive. The adapter receives its power
from the connected drive. When you apply power to the adapter for
the first time, the status indicators should be green or off after an
initialization. If the status indicators are red, there is a problem.
Refer to
Chapter 8 , Troubleshooting .
Applying Power
!
ATTENTION: Risk of equipment damage, injury, or death exists.
Unpredictable operation may occur if you fail to verify that parameter
settings and switch settings are compatible with your application.
Verify that settings are compatible with your application before
applying power to the drive.