Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 33)

Configuring the Adapter 3-7
The following parameters provide information about how the adapter is
configured. You can view these parameters at any time.
Viewing the Adapter Configuration
Number Name Description
01 Mode The operating mode in which the adapter is set:
Values
0 = Single Drv
1 = Multiple Drv
03 CN Addr Act The node address used by the adapter. This will be one of the
following values:
• The address set by the adapter Node Address switches.
• The value of Parameter 02 - [CN Addr Cfg] if the switches
are set to 0.
• An old address of the switches or parameter if they have
been changed and the adapter has not been reset.
13 DSI I/O Act Indicates the drives that are active in the Multi-Drive mode:
Bit Definitions
0 = Drive 0 Active
1 = Drive 1 Active
2 = Drive 2 Active
3 = Drive 3 Active
4 = Drive 4 Active