Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 28)

3-2 Configuring the Adapter
The PowerFlex 4-Class HIM (Human Interface Module) can be used to
access parameters in the adapter (see basic steps shown below). It is
recommended that you read through the steps for your HIM before
performing the sequence. For additional HIM information, refer to the
HIM Quick Reference card.
Note: The HIM will only work when the adapter is set to Single mode.
Using the HIM
Using the PowerFlex 4-Class HIM
Step Key(s) Example Screens
1. Power up the drive.
Then plug the HIM
into the drive. The
Parameters menu for
the drive will be
displayed.
2. Press Sel key once to
display the Device
Select menu.
3. Press Enter to display
the DSI Devices
menu. Press Down
Arrow to scroll to
22-COMM-C.
4. Press Enter to select
the adapter. The
Parameters menu for
the adapter will be
displayed.
5. Press Enter to access
the parameters. Edit
the adapter
parameters using the
same techniques that
you use to edit drive
parameters.
Parameters
Groups
Linear List
Changed Params
DIAG PARAM DSEL MEM SEL !
Sel
Device Select
DSI Devices
DIAG PARAM DSEL MEM SEL !
and
DSI Devices
PowerFlex 40
22-COMM-C
Parameters
Linear List
Changed Params
DIAG PARAM DSEL MEM SEL !
Mode RO
Parameter: # 001
Single Drv 0
VALUE LIMITS SEL !