Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 36)

4-2 Configuring the I/O
Figure 4.1 Example ControlNet Network
Adding the Bridge to the I/O Configuration
To establish communications over a ControlNet network, you must first
add the ControlLogix controller and its bridge to the I/O configuration.
1. Start RSLogix 5000. The RSLogix 5000 window appears. Select
File > New to display the New Controller screen ( Figure 4.2 ).
Figure 4.2 New Controller Screen
Select the appropriate choices for the fields in the screen to match
your application. Then click OK. The RSLogix 5000 window
reappears with the project tree in the left pane.
Node 1
ControlLogix Controller
with 1756-CNB/R Bridge
Node 2
PowerFlex 40 Drive
with 22-COMM-C
ControlNet Adapter
ControlNet Network
(optional redundancy)
Node 99
Computer with 1784-PCC
Network Interface Card and
RSNetWorx for ControlNet