Rockwell Automation 160-DN2 160-DN2 DeviceNet Communication Module FRN 3.xx User Manual
Page 47
Advertising
Publication 0160-5.18 - June 2003
Using 160-DN2 with DeviceNet Scanner
6-9
Configuring the 160 to Accept
Speed Commands from the
Network
The 160-DN2 module must be configured to accept its speed
commands from the network. To do this, change the drive “Frequency
Select” parameter (
).
1. In the Current Value column, click on the value for P59 -
[Frequency Select] and select “Internal Freq” from the
dropdown list.
2. Click Apply to save the changes.
3. Click OK to close the window.
Figure 6.7
Frequency Select Screen
Advertising