Figure 6.10, Configuring the scanner (continued) – Rockwell Automation 160-DN2 160-DN2 DeviceNet Communication Module FRN 3.xx User Manual
Page 50
Advertising
Publication 0160-5.18 - June 2003
6-12
Using 160-DN2 with DeviceNet Scanner
Configuring the Scanner
(Continued)
Figure 6.10
Scanlist Page in the Scanner Module Dialog Box
7. In the “Scanlist,” select the drive, and then click Edit I/O Param-
eters. The Edit I/O Parameters dialog box (
Figure 6.11
Edit I/O Parameters Dialog Box
8. Select the type(s) of data exchange (Strobed, Polled, Change of
State or Cyclic). In our example, we selected Polled.
Advertising