Rockwell Automation 160-DN2 160-DN2 DeviceNet Communication Module FRN 3.xx - Manual (Page 9)

Publication 0160-5.18 - June 2003
Preface
Using This Manual
Manual Objectives The purpose of this manual is to provide you with the necessary
information to apply the Bulletin 160 SSC
 DeviceNet
Communication Module. This manual describes methods to install,
configure, and troubleshoot the Bulletin 160 SSC DeviceNet
Communication Module.
For information on specific features of the Bulletin 160 SSC drive,
refer to the Bulletin 160 SSC User Manual.
Important: Read this manual in its entirety before installing,
operating, servicing, or initializing the Bulletin 160 DeviceNet
Communication Module.
Who Should Use This Manual? This manual is intended for qualified personnel. To make efficient use
of the Communication Module, you must be able to program and
operate serial communications devices, as well as have an
understanding of the parameter settings and functions of the Bulletin
160 SSC drive.
You should understand DeviceNet network operations, including how
slave devices operate on the network and communicate with a
DeviceNet master.
Product References In this manual we refer to the:
• Bulletin 160-DN2 DeviceNet Communication Module as
Communication Module and Module.
• Bulletin 160 SSC Variable Frequency AC Drive as the Drive.
Conventions Parameter names are shown in the format PXX - [*] where P denotes
parameter, XX represents the parameter number, and * represents the
parameter name. For example, P01 - [Output Frequency].
Firmware Version The firmware release is displayed as FRN X.xxx, where:
Places to the right of the decimal do not affect content of this manual.
FRN = Firmware Release Number
X = Firmware (whole) Number
(.) = Decimal point separator
xxx = Place holders representing minor updates