Rockwell Automation 1336VT AC DRIVE 5-300AMP (2-160KW) PROGRAMMING MANUAL - Manual (Page 35)

Local and Serial Port Parameters
Firmware Version 1.01-3.01
Chapter 3
3-21
Parameter 27 Ċ Preset
Frequency 1 Freq P R
P R Enter Hertz
.0
250
.0
Read and Write
Units
Minimum Value
Maximum Value
Factory Setting
The value of this parameter is the command frequency when Preset
Frequency 1 is selected.
Parameter 28 Ċ Preset
Frequency 2
Freq P R
P R Enter Hertz
.0
250
.0
Read and Write
Units
Minimum Value
Maximum Value
Factory Setting
The value of this parameter is the command frequency when Preset
Frequency 2 is selected.
Parameter 29 Ċ Preset
Frequency 3
Freq P R
P R Enter Hertz
.0
250
.0
Read and Write
Units
Minimum Value
Maximum Value
Factory Setting
The value of this parameter is the command frequency when Preset
Frequency 3 is selected.