Rockwell Automation 1336VT AC DRIVE 5-300AMP (2-160KW) PROGRAMMING MANUAL - Manual (Page 81)

10
Chapter
10-1
Serial Port Parameter Settings
Firmware Version 1.01Ć3.01
Table 10 -- Parameter List for Parameters 51 to 69
Parameters 51 to 69 can be accessed only through the serial port.
Serial
Port
Parameter Parameter Min/Max Factory
Number Text Units Values Setting
51 CLEAR FAULT Code 0/255 0
52 INPUT FAULT Code 0/99 ---
53 DRIVE FAULT Code 0/99 ---
54 LOCAL INPUT Byte 0/255 ---
55 REMOTE INPUT Byte 0/255 ---
56 SERIAL INPUT Byte 0/255 ---
57 SERIAL MASK Byte 0/255 0
58 DRIVE COMMAND Byte 0/255 ---
59 DRIVE STATUS Byte 0/255 ---
60 DRIVE ALARM Byte 0/255 ---
61 DRIVE TYPE Byte 0/255 ---
62 FREQUENCY SOURCE Code 0/13 ---
63 PULSE INPUT Hertz 0.00/250.00 ---
64 SERIAL FREQUENCY Hertz 0.00/250.00 0.00
65 FREQUENCY COMMAND Hertz 0.00/250.00 ---
66 OUTPUT FREQUENCY Hertz 0.00/250.00 ---
67 OUTPUT PULSES 1 Rev/256 0/65535/256 ---
68 SERIAL PASSWORD Code 0/9999 0
69 REVERSE STATUS Code 0/1 0