Rockwell Automation 1336VT AC DRIVE 5-300AMP (2-160KW) PROGRAMMING MANUAL - Manual (Page 36)

Local and Serial Port Parameters
Firmware Version 1.01-3.01
Chapter 3
3-22
Parameter 30 Ċ Accel Time 2
Freq P R
P R Enter Seconds
0
600
5
Read and Write
Units
Minimum Value
Maximum Value
Factory Setting
The value of this parameter is the time in seconds it will take the drive
frequency to ramp from zero to the Maximum Frequency set by Parameter
19 when Accel Time 2 is selected.
Parameter 31 Ċ Decel Time 2
Freq P R
P R Enter Seconds
0
600
5
Read and Write
Units
Minimum Value
Maximum Value
Factory Setting
The value of this parameter is the time in seconds it will take the drive to
ramp from the Maximum Frequency set by Parameter 19 to zero when
Decel Time 2 is selected.