Rockwell Automation 1203-GK5 DeviceNet Communications Module FRN 1.xxx-3.xxx - Manual (Page 48)

4-10 Configuring a Scanner to Communicate with the 1203-GK5 Module or 1336-GM5 Board
7. Click OK to display the 1771-SDN Scan List Editor: Both
Channels dialog box. The new node appears in it.
Figure 4.15
1771-SDN Scan List Editor: Both Channels Dialog Box
8. Click the row of the new node to highlight it.
Figure 4.16
1771-SDN Scan List Editor: Both Channels
9. Click Edit I/O Parameters to display the Edit Device I/O
Parameters dialog box.
Figure 4.17
Edit Device I/O Parameters Dialog Box
8
9