Rockwell Automation 1203-GK5 DeviceNet Communications Module FRN 1.xxx-3.xxx - Manual (Page 57)

Configuring a Scanner to Communicate with the 1203-GK5 Module or 1336-GM5 Board 4-19
2. Click Yes to display the Save As dialog box.
Figure 4.36
Save As Dialog Box
3. In the File name box, type a name for the file.
4. In the Save File as type box, select the appropriate extension:
5. Click OK to save the file. The Module and Channel
Configuration dialog box appears.
6. Click Close to close the Module and Channel Configuration
dialog box. A DeviceNet Manager message appears.
Figure 4.37
DeviceNet Manager Message
7. Click Yes to display the Save As dialog box.
Figure 4.38
Save As Dialog Box
8. In the File name box, type a name for the file.
If Using: File Extension:
PLC Scanner (1771-SDN) .SL7
SLC Scanner (1747-SDN) .SL4