Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 366)

Appendix
E
1503-UM054C-EN-P – June 2013
DeviceNet Information
Identify Object
Table E.1 - Class Attributes
Attribute ID
Access
Rule
Name
DeviceNet Data
Type
Data Value
1 Get Revision UINT 1.0
2 Get Max Instance  UINT 1
 Only valid when flash instance is supported.
Number of Instances: 1
Table E.2 – Instance Attributes
Attribute ID
Access
Rule
Name
DeviceNet
Data Type
Data Value
1 Get Vendor ID UINT 1= RA
2 Get Device Type UINT 115=Rockwell Misc.
3 Get Product Code UINT 263=4010P1 option
264=4010P2 option
265=4010P3 option
266=4010P4 option
267=4010P5 option
4 Get Revision STRUCT of:
Major Revision USINT 1
Minor Revision USINT 0
5 Get Status WORD Device status*
6 Get Serial Number UDINT Unique 32 bit number
7 Get Product Name
String length
ASCII string Structure of:
USINT
STRING [9]
21 “IntelliVAC Plus w/ 1IB”
~ “IntelliVAC Plus w/ 5IB”
8 Get state USINT 0 = Nonexistent
1 = Device Self Testing
2 = Standby
3 = Operational
4 = Major Recoverable Fault
5 = Major Unrecoverable Fault
9 Get Configuration
Consistency
value
UINT Unite value depending on output
of the parameter checksum
algorithm
10 Get/Set Heartbeat USING 0~255 (second)