Chapter 6_wiring, Wiring, Chapter – Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module User Manual
Page 88
Chapter
6
1503-UM054C-EN-P – June 2013
Wiring
Wiring (MC)
Pre Configured Logic Mode
The IntelliVAC Plus comes with five (5) preprogrammed logic
programs corresponding to the five most common types of Rockwell
Automation MV controllers requiring multi contactor control. The five
preconfigured logic blocks are:
RVAT (reduced voltage autotransformer starter)
RVR (reduced voltage reactor starter)
FVR (full voltage reversing starter)
SMC (“smart motor controller” solid state reduced voltage starter)
SMC+ PFCC (“smart motor controller” with the addition of
power factor correcting capacitors)
These control profiles can be selected in the device parameters page
in RSNetworx. They are located in the Control parameter group.
Figure 6.1 – Example Parameter List