Rockwell Automation 1329I Integrated AC Drive/Motor, Series B FRN 3.X - Manual (Page 19)

Step 2 - Plan the Installation 2-5
1329I-5.5 Integrated Drive/Motor — January, 2000
2.3.2 Low Voltage Directive 73/23/EEC Compliance
This product complies with Low Voltage Directive 72/23/EEC when conforming with
the following installation requirements:
• Review ATTENTION statements throughout this manual prior to installing the
product.
• The product is intended to be installed with a fixed connection to the earth. The use
of residual-current-operated protective devices (RCDs) or ground fault indicators is
not recommended. If unavoidable, the Bulletin 1329I is compatible with type B
RCDs only.
• The product should be installed in an appropriate or suitable enclosure.
Important: The conformity of this drive and filter to any standard does not guarantee
that the entire installation will conform. Many factors can influence the
total installation and only direct measurements can verify total
conformity.