Rockwell Automation 1329I Integrated AC Drive/Motor, Series B FRN 3.X - Manual (Page 9)

1329I-5.5 Integrated Drive/Motor — January, 2000
Chapter
1
Step 1 - Identify Your Unit
The 1329I integrated drive/motor is an AC drive integrally mounted with an inverter
duty motor. Each unit consists of a Drive Section and a Motor Section.
The Drive Section is a single- or three-phase input, three-phase output inverter providing
open loop V/Hz regulation. It houses the PC boards and the blower. The Motor Section
is a four-pole, three-phase induction motor.
The unit’s default setup suits a wide range of applications. Two rotary switches and a
10-position slide switch on the Control board are used to adjust the setup, if required.
1329I units are identified by catalog number. This number appears on the shipping label
and on the unit’s nameplate. Table 1.1 shows the format of this number and what it
indicates.
Table 1.1
Catalog Number Format
Standard units, described in Section 1.1, provide remote operator control.
Local operator control units, described in Section 1.2, provide local control.
Table 1.2
Option Kits
1329I – B M 001 18 BC A – A
Speed
Range
B 20:1
Voltage
Rating
J 115V
K 200-230V 1-
∅
L 200-230V 3-
∅
M 380-460V
Horsepower
Rating
001 1
002 2
003 3
005 5
Base
Speed
18 1800 RPM
Enclosure
Design
BC Totally Enclosed
Blower Cooled
Display
Options
A Local Control
B Display Only
Motor
Frame Size
(All with C-Face
and Foot Mount)
A 56 Frame
B 140 Frame
C 180 Frame
Drive Input Rating CE Filter Option Kit DeviceNet Communication
Option Kit
Internal Mount
Internal Mount NEMA 12 Enclosed
115V, 230V
Single Phase
1329I-NLF1 1329I-JLF1
1329I-DN1
230V, 460V
Three Phase
1329I-NLF3 1329I-JLF3