Rockwell Automation 1756-OF8H ControlLogix HART Analog I/O Modules - Manual (Page 137)

Rockwell Automation Publication 1756-UM533C-EN-P - February 2011 137
Getting HART Data By Using CIP MSG Chapter 8
Note that SWPB reverses the order of bytes in the PV, SV, TV, FV floating-point
numbers to be in the Logix REAL format.
The following dialog boxes are the Init Message Configuration and
Communication tabs when Command 9 is sent to HART device on channel 0.
Note instance 1 means Channel 0.
User-defined Type:
HARTCmd9InitSrc
Size of HARTCmd9InitSrc
Destination: HARTInitDst