Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 100)

Publication 1734-UM015A-EN-E - November 2009
98 Peer Data Maps
2-Point Analog Input Modules and RTD (Resistant Temperature
Device)
1734-IE2C, 1734-IE2V, 1734-IR2, 1738-IE2CM12, 1738-IE2VM12,
1738-IR2M12
Peer X (byte 3, bit 6) Peer missing 6
Peer X (byte 3, bit 7) Peer missing 7
Peer X (word 2) User defined word 0 (PNW0)
Peer X (word 3) User defined word 1 (PNW1)
Peer X (word 4) User defined word 2 (PNW2)
Peer X (word 5) User defined word 3 (PNW3)
Peer X (word 6) User defined word 4 (PNW4)
Peer X (word 7) User defined word 5 (PNW5)
Peer X (word 8) User defined word 6 (PNW6)
Peer X (word 9) User defined word 7 (PNW7)
Input Tags for 2-Point Analog Input Modules and RTD
Input Tag in DeviceLogix Editor Data
Peer X (word 0) Input channel 0
Peer X (word 1) Input channel 1
Peer X (byte 4, bit 0) Channel 0 fault
Peer X (byte 4, bit 1) Channel 0 calibration mode
Peer X (byte 4, bit 2) Channel 0 low alarm
Peer X (byte 4, bit 3) Channel 0 high alarm
Peer X (byte 4, bit 4) Channel 0 low low alarm
Peer X (byte 4, bit 5) Channel 0 high high alarm
Peer X (byte 4, bit 6) Channel 0 underrange
Peer X (byte 4, bit 7) Channel 0 overrange
Peer X (byte 5, bit 0) Channel 1 fault
Peer X (byte 5, bit 1) Channel 1 calibration mode
Peer X (byte 5, bit 2) Channel 1 low alarm
Peer X (byte 5, bit 3) Channel 1 high alarm
Peer X (byte 5, bit 4) Channel 1 low low alarm
Input Tags for 8-Point Digital Input Modules with DeviceLogix (Continued)
Input Tag in DeviceLogix Editor Data