Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 26)

Publication 1734-UM015A-EN-E - November 2009
24 Install POINT I/O DeviceLogix Modules
Wire the Modules This section provides wiring instructions for the modules.
1734-8CFGDLX I/O Module
1734-8CFGDLX Wiring Diagram
7
1
3
0
2
Module
Status
Network
Status
Device
Logix
Status
1734
8CFGDLX
1
3
0
2
5
7
4
6
NODE:
44758
Module Status
Network Status
I/O 0 I/O 1
I/O 2 I/O 3
I/O 4 I/O 5
I/O 6 I/O 7
Status of I/O 0
Status of I/O 1
Status of I/O 2
Status of I/O 3
Note that voltage and current to the module is applied through the adapter,
the 1734-FPD module, or the 1734-EP24DC module. V = 10…28.8 V DC.
Status of I/O 4
Status of I/O 5
Status of I/O 6
Status of I/O 7
DeviceLogix Status
Prox I/O 0 Load
Prox
Prox
Prox
Load
Load
Load
I/O 2
I/O 4
I/O 6
I/O 1
I/O 3
I/O 5
I/O 7
V C C
If a connection to Common or the Supply Voltage is required for two- or
three- wire devices, then a 1734-CTM or 1734-VTM can be used.
Each I/O point is either Input or Output.
44687